fbpx

Product Catalog

ER410NiMo


Alloy Type:

ER410NiMo is extensively used to weld cast and wrought material of similar chemical composition.  Preheating and interpass temperature of not less than 300⁰F is required.

 

AWS Class: ER410NiMo Certification:  AWS A5.9/ A5.9M:2006
Alloy:  ER410NiMo AWS/ASME SFA A5.9

 

Welding Position:

F, V, OH, H

Current:

MIG-DCEP

TIG-DCEN

 

Typical Properties (as welded)

Yield, kpsi: 92
Tensile Strength, kpsi: 118
Elongation%, min: 20

 

 

 

Typical Wire Chemistry as per AWS A5.9 (single values are maximum)

C Cr Ni Mo Mn Si P S Cu
0.06 11.0-12.5 4.0-5.0 0.4-0.7 0.6 0.5 0.03 0.03 0.75

 

 

Typical Welding Parameters
Diameter Process Volt  

Amps

GAS
in (mm)
.035  (0.9) GMAW 26-29 160-210 98% Argon/2% Oxygen or 97% Argon/3% Oxygen
.045  (1.14) GMAW 28-32 180-250 98% Argon/2% Oxygen or 97% Argon/3% Oxygen
1/16” (1.6) GMAW 29-33 200-280 98% Argon/2% Oxygen  or 97% Argon/3% Oxygen
Diameter Process Volt  

Amps

GAS
in (mm)
 1/16”  (1.6) GTAW 14-18 90-130 100% Argon
 3/32”  (2.4) GTAW 15-20 120-175 100% Argon
 1/8”  (3.2) GTAW 15-20 150-220 100% Argon

 

Search all Products

Copyright 2024 Welding Material Sales | Admin